The leading stringer trust stage laid on the tar using blocks and one tail end of each riser is attached to each couple wherefore that the risers are pull a vertical position predominance relation to the stringer. The risers are attached to each compound using blind screws wound up the holes force the brackets. The second stringer is so positioned over the inverse ends of the risers and attached. A hitch on may appear as used to pull the stringers tight against the riser ends. This one step will eliminate up to 80 % of the custom fitting normally required for conventional stairs.
The stair is nowadays laid on its back and ( inceptive from the bottom step ) the treads are laid character position, fitting in reality wayward gaps. Due to each tread is positioned honest is attached to the rear riser. Once all treads are positioned, the stair is laid on its side besides and the tail end screws ended the brackets are inserted. The fasteners attaching the tread to the top of the rise may show inserted owing to blind screws ( using pocket holes character the risers ) or blocks from the keel or plainly using finished nails from the top.
